FULL DIGITAL SOUND PROCESSOR (SOUND PROCESSOR/TWEETER /COMMANDER)
Z3
Sound processor
| Analog output | 4Vrms (VOL 0db) |
|---|---|
| S/N | 110dB (A filter) |
| Harmonic Distortion | 0.01％ |
| Analog input | RCA input, Speaker level input |
| Input sensitivity
|
Low: RCA-in=4Vrms/power-in=8Vrms |
| Mid: RCA-in=2Vrms/power-in=4Vrms | |
| High: RCA-in=1Vrms/power-in=2Vrms | |
| Digital coaxial input | 0.5Vp-p/75Ω, Up to 96kHz/24Bit/PCM |
| Digital optical input | Up to 96kHz/24Bit/PCM |
| Power Supply | 10.8 ～15.6V DC, Negative ground |
| Current Consumption | Maximum 15A |
| Weight | 1.46lbs (660g) |
| Dimensions | 7 (W) ×1 4/9 (H) ×4 7/12 inch (D) inch
（180（W）×37（H）×116（D）mm） |
Commander (Supplied with Z3)
| Weight | 0.85lbs （385g） |
|---|---|
| Dimensions | 3 14/15 (W) ×1 (H) ×1 4/5 inch (D) inch
（100（W）×27(H）×46（D）mm） |
Tweeter (Supplied with Z3)
| ＜ Driving section ＞ | |
|---|---|
| Maximum output | 9W (4.5W × 2 Driver)× 2ch |
| Rated output | 6W(3W × 2 Driver)× 2ch at 1% THD+N |
| ＜Speaker section＞ | |
| Impedance | 6Ω × 2ch |
| Frequency response | 1.5kHz ～ 40kHz |
| Weight (One speaker) | 0.17lbs （77g） |
| Dimensions | 1 9/16 (W) ×1 9/16 (H) ×0 7/8 (D) inch
（40（W）×40（H）×21.5（D）mm） |
Commander (Supplied with Z3) Operation command list
| Settings | Adjustment method | |||
|---|---|---|---|---|
| Commander | Tuning application | |||
| Main VOL | －99dB ～ 0dB（ 1dB step） | ○ | - | |
| SW VOL | －10dB ～ +10dB（ 0.5dB step） | ○ | - | |
| Memory select | Custom memory 1 / Custom memory 2 /
Custom memory 3 / Custom memory 4（4 Patterns） |
○ | ○ | |
| Intelligent
Tune |
Sound Restorer | OFF / Low / Mid / High | ○ | ○ |
| Virtual Bass | OFF / Low / Mid / High | ○ | ○ | |
| Tone Filter | Vivid +2 / Vivid +1 / OFF / Vintage +1 / Vintage +2 | ○ | ○ | |
| Reverb Control | OFF / Low / Mid / High | ○ | ○ | |
| Balance | Left 12 ～ Center ～ Right 12 | ○ | - | |
| Fader | Rear 12 ～ Center ～ Front 12 | ○ | - | |
| Source (Input setting) | Digital optical / Digital coaxial / Analog / USB | ○ | - | |
| Audio Sense | Low / Mid / High | ○ | - | |
| Brightness | OFF / Level 1 ～ 10 | ○ | - | |
| Beep | ON / OFF | ○ | - | |
Main supplied items
- Sound Processor
- Commander (8.09ft) (2.46m)
- Tweeter kit
- Power cable (8.22ft) (2.5m) * Grounding cord (6.58ft) (2m)
- Speaker input cable (6.58ft) (2m)
- USB cable A (1.64ft) (0.5m)
- USB cable B (0.49ft) (0.15m)
＜ Tweeter kit >
- Tweeter × 2
- Mount adapter × 2
- Flush-mount spacer × 2
- Lever arm × 2
- Z3 output cord (1ft) (0.3m)
- Extension cord (9.8ft) (3m) × 2
