Full Digital Sound Processor (Sound Processor/Tweeter /Commander)
Z3
Sound processor
| Analogue output | 4Vrms (VOL 0db) |
|---|---|
| S/N | 110dB (A filter) |
| Harmonic Distortion | 0.01% |
| Analogue input | RCA input, Speaker level input |
| Input sensitivity
|
Low: RCA-in=4Vrms/power-in=8Vrms |
| Mid: RCA-in=2Vrms/power-in=4Vrms | |
| High: RCA-in=1Vrms/power-in=2Vrms | |
| Digital coaxial input | 0.5Vp-p/75Ω, Up to 96kHz/24Bit/PCM |
| Digital optical input | Up to 96kHz/24Bit/PCM |
| Power Supply | 10.8 ~15.6V DC, Negative ground |
| Current Consumption | Maximum 15A |
| Weight | 660g |
| Dimensions | 180(W)×37(H)×116(D)mm |
Commander (Supplied with Z3)
| Weight | 385g |
|---|---|
| Dimensions | 100(W)×27(H)×46(D)mm |
Tweeter (Supplied with Z3)
| < Driving section > | |
|---|---|
| Maximum output | 9W (4.5W × 2 Driver)× 2ch |
| Rated output | 6W(3W × 2 Driver)× 2ch at 1% THD+N |
| <Speaker section> | |
| Impedance | 6Ω × 2ch |
| Frequency response | 1.5kHz ~ 40kHz |
| Weight (One speaker) | 77g |
| Dimensions | 40(W)×40(H)×21.5(D)mm |
Commander (Supplied with Z3) Operation command list
| Settings | Adjustment method | |||
|---|---|---|---|---|
| Commander | Tuning application | |||
| Main VOL | -99dB ~ 0dB( 1dB step) | ○ | - | |
| SW VOL | -10dB ~ +10dB( 0.5dB step) | ○ | - | |
| Memory select | Custom memory 1 / Custom memory 2 /
Custom memory 3 / Custom memory 4(4 Patterns) |
○ | ○ | |
| Intelligent
Tune |
Sound Restorer | OFF / Low / Mid / High | ○ | ○ |
| Virtual Bass | OFF / Low / Mid / High | ○ | ○ | |
| Tone Filter | Vivid +2 / Vivid +1 / OFF / Vintage +1 / Vintage +2 | ○ | ○ | |
| Reverb Control | OFF / Low / Mid / High | ○ | ○ | |
| Balance | Left 12 ~ Center ~ Right 12 | ○ | - | |
| Fader | Rear 12 ~ Center ~ Front 12 | ○ | - | |
| Source (Input setting) | Digital optical / Digital coaxial / Analog / USB | ○ | - | |
| Audio Sense | Low / Mid / High | ○ | - | |
| Brightness | OFF / Level 1 ~ 10 | ○ | - | |
| Beep | ON / OFF | ○ | - | |
Main supplied items
- Sound Processor
- Commander (2.46m)
- Tweeter kit
- Power cable (2.5m) * Grounding cord (2m)
- Speaker input cable (2m)
- USB cable A (0.5m)
- USB cable B (0.15m)
< Tweeter kit >
- Tweeter × 2
- Mount adapter × 2
- Flush-mount spacer × 2
- Lever arm × 2
- Z3 output cord (0.3m)
- Extension cord (3m) × 2

